ALS 40, ALPA 40
产品特点
- 14毫米实心轴（法兰或底脚安装）
- 在最极端的工作条件下，使用寿命延长了许多倍
- 高信号质量，高达16位单匝，多种接口
- 选项：增量输出
最极端条件下的专家
Looper encoders AL…40 are absolute encoders designed for the most extreme conditions with shock loads up to 450 g. They are mostly deployed in roll stands in hot rolling mills between the roll housings where they subject to high levels of energy. They supply precise information about the angle position of the looper, which is used for the highly dynamic feedback speed control of the rollers. At the same time the AL…40 reach a service life many times longer than other models. Lubricated with special grease their ball bearings offer an approximately 40 per cent higher load rating.
规格
| 电源电压 | 12-30 VDC |
| 解析度 | 单圈最大 16位（每旋转65536步） |
| 接口数量 | 1 |
| 接口/产品名称 | SSI (Gray; Binär; Inkremental) | ALS 40 Parallel | ALPA 40 HTL,TTL | FGL 40 |
| 最大转数 | 实心轴：最高4000 rpm |
| 电气连接 | -接线盒中的端子排 -固定电缆 |
| Construction type / Ø shafts | Solid shaft (B5, B35): Ø 11 mm, Ø 14 mm with feather key |
| 设备温度范围 | -25 °C to +100 °C |
| 防护等级 | IP67 /IP 67 |
| 重量 | 大约 3.5公斤 |
| 设备选项 | 预设功能（预设1000） |
| 特殊功能和证书 | -额定载荷高40％的球轴承，加强轴 -UL/CSA |
ZH 
EN